Transformer, Definition, Explanation, working, construction, types

Definition:-

"Transformer is an electrical device that converts low voltage into high voltage or high voltage into low voltage."

Explanation:-

Transform the current or voltage, it is used to get high voltage when input is of low voltage and to get low voltage from high voltage.

Transform works on the principal of Mutual Induction, according to which "When alternating current flows through one winding of coil, due changing nature of ac current, there produce an emf across winding and magnetic flux around winding. When another winding of coil comes near the first winding, there is effect of magnetic flux of first winding on second winding and due to AC current as it changes continuously produces changing magnetic flux of first winding and due to this change there causes the EMF in second winding and hence current starts to flow through second winding, so this process is known as mutual Inductance". Transformer works on this principle. As there is no connection between two coils(we just bring the second nearer to the first), the current transfer will be very small as compared to first. So we use Core to link these two winding, because of this current loss is so small.

Construction:-

 It consists of following,

1.Primary coil

2.Secondary coil

3.Core

4.AC current source

Working:-

Whenever we supplies ac current to primary coil then due to changing nature of ac current there produces change in magnetic flux around this winding. And due to this changing current starts to flow through core and reached to the secondary winding and through this secondary winding goes to external circuit, When we need to change low voltage to high voltage then we have to increase the winding of secondary coil. This type of transformer is known as Step up Transformer. If we want to change the high voltage into low voltage, than we have to decrease the winding of secondary coil. This type of transformer is known as Step down Transformer.

Electrical Motor(DC)

Definition:

"Electric motor is a device that converts electrical energy to mechanical energy"
The device which converts electrical energy into other form of energy which is mechanical energy so that we can take benefit from it.

Types of Motor:

There are two basic types of electric motor:-

1.DC motor

2.AC motor

 

DC motor Explanation:

The motor which converts DC power to the mechanical energy or power is known as dc motor.

Above diagram is of dc motor. It consists of a magnet, armature or conducting loops, carbon brushes, commutator, dc source or battery.

Working:-

When we connect the battery with the carbon brushes than through commutator they cause the current to flow through loops, as on the other hand there is also magnetic field from north to south so as we have studied Fleming's left hand rule(will explain below), the loops will move upward from one side and will move downward from other side. When this current carrying conductor(conducting loops) will change position at 90 degree than again according to the Fleming's rule this loop will move as it is going. So that how it works. other end of loop would be connected with the object to whom we want to provide mechanical energy. 

Fleming's Left hand rule:-

This rule states that" hold your left hand and tied your 1st finger, 2nd finger and thumb in such a way that they each other become perpendicular(Right angle) to each other. now if first finger is the direction of magnetic field and 2nd finger represent the current flowing through coil, then thumb will represent the force acting on it." 

Centripetal force

Definition:

"Centripetal force is a force, which keeps a body moving in a circular path and that force acting towards the center of that circular path."

Explanation:

A body never automatically or itself moves in a circular path it, there is always a reason or some force that causes it to move in a circular path and that force in general is known as a centripetal force. and that force is always directed towards  center. it means force is from the center of circular path that causes it to move in a circular path.

Example:

You tries to move a string in a circular path. one end of it is in your hand and other is tied with a stone. and consider that stone is a body. you provide force from your hand which is at the center of circular path in which stone(body) is moving.

Formula:

 

This equation shows that force depends on the mass of body and the velocity by which it is moving in path and the distance(r) between the center of circular path and body.

What is Force?

Definition:-

"Force is a reason or something that causes the change in a motion or situation of a body."

Explanation:

Force is the reason which causes change, if you want to move something or you want to do some work you have to apply force.
A force is a vector quantity. a vector quantity is a quantity that has both magnitude and direction.




Unit:

Force is a quantity that is measured using the standard metric unit known as the Newton.  
1 Newton = 1 kg • m/s2

Formula:

According to the newton second law of motion, force is the product of mass and acceleration. Means force depends on mass and acceleration of body.It means that if a body has change in its velocity(speed) or position, then its depend upon the total force acting upon him and the mass of the body. It is also known as law of inertia. Having low mass will demand less force for change in its speed.
F=m.a